ALUSTEP® 500 SL

ALUSTEP® 500 SL, greater flexural resistance combined with the lightness of a panel with an aluminium honeycomb core and fiberglass skins.

STEP series panels are applied in the stone sector to lighten marble and natural stones, as a reinforcement and support structure for mosaics or in the restoration sector. Due to their lightness, these panels can be used in buildings interiors as a marble support for floors and worktops. In addition, they are used in boat and mega yachts interiors where lightness combined with high mechanical properties becomes a key point in this sector .

Technical features

ALUSTEP® 500 SL is a sandwich panel with an aluminium honeycomb core and fibreglass skins impregnated with epoxy resin. It is characterized by high bending resistance and good resistance to medium temperatures. The panels of the -STEP are purchased by art galleries as a support for their works. In particular, Disney has created some of its splendid mosaics using CEL Components panels.

A - SKIN IN GLASSFIBRE 
490g/m2 impregnated with epoxy resin
 
B - CORE IN ALUMINIUM HONEYCOMB
(Alloy series 3000*) with hexagonal cells
  Diameter in inches: Ø1/4”, Ø3/8”**
  Foil thickness: from 50 to 70 microns

Thickness starting from 3,5 mm to 50 mm
*   Serie 5000 on demand
** Ø3/8” on request

Dimensions

Applications

Lightening Marble Mosaics
Yachts and Shipbuilding
Floor panels
Interiors
Building and restoration

Technical datasheet

Data +
Technical data sheet for standard panels (dimensions, materials and special finishes on request)
TECHNICAL CHARACTERISTICS OF PANEL
thickness of the panel mm
from 3,5 to 50
panel size mm
standard 1250 x 2500 / 1500 x 3000 
on request up to 1550 x 3050
thickness’ tolerance mm
± 0,3
dimension’s tolerance mm
± 30
skins’ thickness mm
0,4
glass fibre skin
Glass fibre Plain 500 gr/m²
honeycomb alluminium alloy
3000 series / 5000 series
thickness of honeycomb foil μm
50 and 70
diameter of honeycomb Ø = mm
from 3 to 19
honeycomb density Kg/m³
from 20 to 116
adhesive for aluminum honeycomb
Epoxy Resin
PANEL PHYSICAL AND MECHANICAL PERFORMANCES
type panel (some examples) mm
5
10
15
20
25
30
35
panel weight ‡ Kg/m2
1,9±0,2
2,2±0,2
2,5±0,2
2,8±0,2
3,1±0,2
3,3±0,2
3,5±0,2
compressive stabilised strength MPa ** ‡ ASTM C 365-365 M Mpa
2,9 ± 0,3
maximum load ** ‡ ASTM C 393 † N
130
270
420
570
720
850
1000
deflection at maximum load ‡ ASTM C 393 † mm
42±6
20±3
14±2
11±2
8±1
7±1
6±1
skins E Elastic Modulus ** Mpa
26.000±2.000
moment of inertia I ** mm4/m
4.200
18.400
42.600
76.800
121.000
175.400
239.940
middle resistance to peeling ** ‡ ASTM D1781-98 (2012)
> 500 N/76 mm or >55 Nmm/mm
maximum service temperature ** °C
- 50 / + 90
thermal expansion coefficient ** °C-1
1,5 * 10^-5 / 1,5 mm for ΔT 100 °C for 1 meter length

 

* Tested by external Laboratory
** Tested by Internal Laboratory
‡ All values refer to a panel made of aluminum honeycomb with a cell diameter 6 mm 56 kg/m3 and epoxy adhesive
† Sample dimension with 4 support points (L, W) 540x540; distance among the lower points 500mm.
 

CONFORM TO AMERICAN STANDARDS

ASTM C67-M18
 

Water Absorption

ASTM E72-15
 

Strength-Transverse load

ASTM C297 M-16
 

Flatwise tensile strength

ASTM E84-17
 

Flamespread

TAS 201
TAS 203

Impact and Cyclic Wind Pressure

Honeycomb core 50 microns +
Honeycomb core’s properties
50 Microns
Type
Aluminium Alloy 3003/3005/3103/3104
Ø honeycomb in mm ca.
6
9
Ø honeycomb in inches
1/4"
3/8"
Density kg/m3
56 - 59
39 - 40
Compressive stabilised strength MPa 
3,0 - 3,5
1,4 - 1,95
Honeycomb core 70 microns +
Honeycomb core’s properties
70 Microns
Type
Aluminium Alloy 3003/3005/3103/3104
Ø honeycomb in mm ca.
6
9
Ø honeycomb in inches
1/4"
3/8"
Density kg/m3
80 - 83
54
Compressive stabilised strength MPa 
4,3 - 4,6
2,5 - 2,6
Disclaimer

LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.

IMPORTANT

To allow us to offer you a panel with particular finishes or colors without minimal pigment variations, it is recommended to place an overall order , so that we can plan the production with the rolling mills that will carry out the painting of the sheets in a batch.

Request a quotation